P110,Boiler Pipe,Inconel Alloy pipe,Scaffolding Pipe

P110

Stainless Steel Plate,Pipe Stands & Clamps,Concrete Weight Coating pipe
P110,Boiler Pipe,Inconel Alloy pipe,Scaffolding Pipe

P110

API 5CT P110 is a type of steel pipe that is typically used in well construction and the petroleum industry. It is mostly used as casing and tubing for OCTG (oil country tubular goods). API 5CT P110 has a higher collapse resistance due to the addition of vanadium, chromium, and molybdenum. The well owner may use this type of steel pipe to protect their well and increase its longevity. Steel pipes like API 5CT P110 are also used in other industries such as construction or transportation. However, the well-construction industry is the main user of this type of pipe.

Send Email

  • PRODUCT DESCRIPTION OF API 5CT P110

    Product Name API-5CT P110
    Size O. D 26.67-508mm
    W. T 2.87-16.13mm
    Length R1(5.49-6.71m),R2(8.23-9.14m),R3(11.58-13.72m)
    Type of End Finish
    1.Plain end
    2.Short round thread
    3.Long round thread
    4.Buttress thread
    Surface
    1.Black Painted
    2.With oil
    3.Bared or as per customers’ requirement
    Standard API 5CT
    Application Tube for conveying gas, water, and oil in both and natural gas industries etc.

  • CHEMICAL COMPOSITION OF API 5CT P110

    Grade Type C Mn Mo Cr Ni max. Cu max. P max. S max. Si max.
    min. max. min. max. min. max. min. max.
    P110 – 0.26 0.35 0.4 0.7 0.15 0.25 0.8 1.1 0.2 0.2 0.02 0.01 0.37
    For EW Grade P110, the phosphorus content shall be 0.020 % maximum and the sulfur content 0.010 % maximum.
    NL = no limit. Elements shown shall be reported in product analysis.

  • MECHANICAL ANALYSIS OF API 5CT P110

    API 5CT Casing Pipe Standard API 5CT Casing Pipe Type
    API 5CT Casing Pipe Tensile Strength
    MPa
    API 5CT Casing Pipe Yield Strength
    MPa
    		Total elongation under load %
    API SPEC 5CT P110 – ≥862 758 ~ 965 0.6

  • API 5CT P110 CASING AND TUBING SPECIFICATIONS

    - Specification & Size of API 5CT P110 Tubing

    DN O. D. Weight W. T. End Processing
    Non-upset coupling-thread Upset coupling-thread Steel Grade
    in mm lb./ft. lb./ft. in mm H40 J55 L80 N80 C90 T95 P110
    2 3/8 2.38 60.3 4 – 0.167 4.24 PU PN PN PN PN PN –
    4.6 4.7 0.19 4.83 PNU PNU PNU PNU PNU PNU PNU
    5.8 5.95 0.254 6.45 – – PNU PNU PNU PNU PNU
    6.6 – 0.295 7.49 – – P – P P –
    7.35 7.45 0.336 8.53 – – PU – PU PU –
    2 7/8 2.88 73 6.4 6.5 0.217 5.51 PNU PNU – – – – –
    7.8 7.9 0.276 7.01 – – – – – – –
    8.6 8.7 0.308 7.82 – – PLB PLB PLBE – PLB
    9.35 9.45 0.34 8.64 – – PLB PLB PLBE – PLB
    10.5 – 0.392 9.96 – – PLB PLB PLB – PLB
    11.5 – 0.44 11.18 – – – – PLB –  
    3 1/2 3.5 88.9 7.7 – 0.216 5.49 PN PN PN PN PN PN –
    9.2 9.3 0.254 6.45 PNU PNU PNU PNU PNU PNU PNU
    10.2 – 0.289 7.34 PN PN PN PN PN PN –
    12.7 12.95 0.375 9.52 – – PNU PNU PNU PNU PNU
    14.3 – 0.43 10.92 – – P – P P –
    15.5 – 0.476 12.09 – – P – P P –
    17 – 0.53 13.46 – – P – P P –
    4 4 102 9.5 – 0.226 5.74 PN PN PN PN PN PN –
    – 11 0.262 6.65 PU PU PU PU PU PU –
    13.2 – 0.33 8.38 – – P – P P –
    16.1 – 0.415 10.54 – – P – P P –
    18.9 – 0.5 12.7 – – P – P P –
    22.2 – 0.61 15.49 – – P – P P –
    4 1/2 4.5 114 12.6 12.75 0.271 6.88 PNU PNU PNU PNU PNU PNU –
    15.2 – 0.337 8.56 – – P – P P –
    17 – 0.38 9.65 – – P – P P –
    18.9 – 0.43 10.92 – – P – P P PLB
    21.5 – 0.5 12.7 – – P – P P PLB
    23.7 – 0.56 14.22 – – P – P P PLB
    26.1 – 0.63 16 – – P – P P PLB
    P——Plain；N—— Non-upset coupling-thread；U—— Upset coupling-thread； L——Integral


    - Specification & Size of API 5CT P110 Casing

    DN O. D. Weight W. T.   End Machining Form
      Steel Grade
    in mm lb/ft kg/m in mm H40 J55 L80 N80 C90 P110
    K55 T95
    4 1/2 4.500 114.3 9.5 14.14 0.205 5.21 PS PS – – – –
    10.5 15.63 0.224 5.69 – PSB – – – –
    11.6 17.26 0.250 6.35 – PSLB PLB PLB PLB PLB
    13.5 20.09 0.290 7.37 – – PLB PLB PLB PLB
    15.1 22.47 0.337 9.56 – – – – – PLB
    5 5.000 127 11.5 17.11 0.220 5.59 – PS – – – –
    13 19.35 0.253 6.43 – PSLB – – – –
    15 22.32 0.296 7.52 – PSLB PLB PLB PLBE PLB
    18 26.79 0.362 9.19 – – PLB PLB PLBE PLB
    21.4 31.85 0.437 11.1 – – PLB PLB PLB PLB
    23.2 34.53 0.478 12.14 – – – – PLB –
    24.1 35.86 0.500 12.7 – – – – PLB –
    5 1/2 5.500 139.7 14 20.83 0.244 6.2 PS PS – – – –
    15.5 23.07 0.275 6.98 – PSLB – – – –
    17 25.3 0.304 7.72 – PSLB PLB PLB PLBE PLB
    20 29.76 0.361 9.17 – – PLB PLB PLBE PLB
    23 34.23 0.415 10.54 – – PLB PLB PLBE PLB
    26.8 39.88 0.500 12.7 – – – – – –
    29.7 44.2 0.562 14.27 – – – – – –
    32.6 48.51 0.625 15.88 – – – – – –
    35.3 52.53 0.687 17.45 – – – – – –
    38 56.55 0.750 19.05 – – – – – –
    40.5 60.27 0.812 20.62 – – – – – –
    43.1 64.14 0.875 22.22 – – – – – –
    6 5/8 6.625 168.28 20 29.76 0.288 7.32 PS PSLB – – – –
    24 35.72 0.352 8.94 – PSLB PLB PLB PLBE PLB
    28 41.67 0.417 10.59 – – PLB PLB PLBE PLB
    32 47.62 0.475 12.06 – – PLB PLB PLBE PLB
    7 7.000 177.8 17 25.3 0.231 5.87 PS – – – – –
    20 29.76 0.272 6.91 PS PS – – – –
    23 34.23 0.317 8.05 – PSLB PLB PLB PLBE –
    26 38.69 0.362 9.19 – PSLB PLB PLB PLBE PLB
    29 43.16 0.408 10.36 – – PLB PLB PLBE PLB
    32 47.62 0.453 11.51 – – PLB PLB PLBE PLB
    35 52.09 0.498 12.65 – – PLB PLB PLBE PLB
    38 56.55 0.540 13.72 – – PLB PLB PLBE PLB
    42.7 63.54 0.625 15.88 – – – – – –
    46.4 69.05 0.687 17.45 – – – – – –
    50.1 74.56 0.750 19.05 – – – – – –
    53.6 79.77 0.812 20.62 – – – – – –
    57.1 84.97 0.875 22.22 – – – – – –
    7 5/8 7.625 193.68 24 35.72 0.300 7.62 PS – – – – –
    26.4 39.29 0.328 8.33 – PSLB PLB PLB PLBE PLB
    29.7 44.2 0.375 9.52 – – PLB PLB PLBE PLB
    33.7 50.15 0.430 10.92 – – PLB PLB PLBE PLB
    39 58.05 0.500 12.7 – – PLB PLB PLBE PLB
    42.8 63.69 0.562 14.27 – – PLB PLB PLB PLB
    45.3 67.41 0.595 15.11 – – PLB PLB PLB PLB
    47.1 70.09 0.625 15.88 – – PLB PLB PLB PLB
    51.2 76.19 0.687 17.45 – – – – – –
    55.3 80.3 0.750 19.05 – – – – – –
    8 5/8 8.625 219.08 24 35.72 0.264 6.71 – PS – – – –
    28 41.62 0.304 7.72 PS – – – – –
    32 47.62 0.352 8.94 PS PSLB – – – –
    36 53.57 0.400 10.16 – PSLB PLB PLB PLBE PLB
    40 59.53 0.450 11.43 – – PLB PLB PLBE PLB
    44 65.48 0.500 12.7 – – PLB PLB PLBE PLB
    49 72.92 0.557 14.15 – – PLB PLB PLBE PLB
    9 5/8 9.625 244.48 32.3 48.07 0.312 7.92 PS – – – – –
    36 53.57 0.352 8.94 PS PSLB – – – –
    40 59.53 0.395 10.03 – PSLB PLB PLB PLBE –
    43.5 64.73 0.435 11.05 – – PLB PLB PLBE PLB
    47 69.94 0.472 11.99 – – PLB PLB PLBE PLB
    53.5 79.62 0.545 13.84 – – PLB PLB PLBE PLB
    58.4 86.91 0.595 15.11 – – PLB PLB PLB PLB
    59.4 88.4 0.609 15.47 – – – – – –
    64.9 96.58 0.672 17.07 – – – – – –
    70.3 104.62 0.734 18.64 – – – – – –
    75.6 112.5 0.797 20.24 – – – – – –
    10 3/4 10.750 273.05 32.75 48.74 0.279 7.09 PS – – – – –
    40.5 60.27 0.350 8.89 PS PSB – – – –
    15.5 67.71 0.400 10.16 – PSB – – – –
    51 75.9 0.450 11.43 – PSB PSB PSB PSBE PSB
    55.5 82.59 0.495 12.57 – – PSB PSB PSBE PSB
    60.7 90.33 0.545 13.84 – – – – PSBE PSB
    65.7 97.77 0.595 15.11 – – – – PSB PSB
    73.2 108.93 0.672 17.07 – – – – – –
    79.2 117.86 0.734 18.64 – – – – – –
    85.3 126.94 0.797 20.24 – – – – – –
    11 3/4 11.750   42 62.5 0.333 8.46 PS – – – – –
    47 69.94 0.375 20.24 – – – – – –
    54 80.36 0.435 8.46 – – – – – –
    60 89.29 0.489 9.53 – – – – – –
    65 96.73 0.534 11.05 – – – – – –
    71 105.66 0.582 14.42 – – – – – –
    13 3/8 13.375 339.73 48 71.43 0.330 8.38 PS – – – – –
    54.5 81.1 0.380 9.65 – PSB – – – –
    61 90.78 0.430 10.92 – PSB – – – –
    68 101.19 0.480 12.19 – PSB PSB PSB PSB PSB
    72 107.15 0.514 13.06 – – PSB PSB PSB PSB
    16 16.000 406.4 65 96.73 0.375 9.53 PS – – – – –
    75 111.61 0.438 11.13 – PSB – – – –
    84 125.01 0.495 12.57 – PSB – – – –
    109 162.21 0.656 16.66 – P P P – P
    18 5/8 18.625 473.08 87.5 130.21 0.435 11.05 PS PSB – – – –
    20 20.000 508 94 139.89 0.438 11.13 PSL PSLB – – – –
    106.5 158.49 0.500 12.7 – PSLB – – – –
    133 197.93 0.635 16.13 – PSLB – – – –
    P——Plain；S——Short-thread；L——Long-thread；B——Buttress thread；E——Extreme thread

Follow us   facebook instagram twitter youtube linkedin

Stainless Steel Plate,Pipe Stands & Clamps,Concrete Weight Coating pipe

LEAVE A MESSAGE HERE

Products

Workshop

Copyright @ 2023 Union Steel Industry Co.,Ltd All Rights Reserved Privacy Policy
We use cookies and other tracking technologies to improve your browsing experience on our website, to show you personalized content and targeted ads, to analyze our website traffic, and to understand where our visitors are coming from.
Accept
Decline