Descripción
Titanium Tubes and Pipes are available as Welded and Seamless form and in conformance with leading international standards including DIN, JISC, AMS, GB and ASTM (B338 B861 B862). Titanium tubing is suitable for environments and applications where the properties of stainless steels are not sufficient.
Seamless Titanium Pipes are available in length of up to 18m with diameter ranges from 0.4mm up to 340mm.
Welded Titanium Pipes are available for supply in lengths of 15m with a diameter range of 90mm to up 5,000mm. Our titanium welded pipes are welded with single continuous weld lines and are 100% xray tested and liquid penetrant testing.
Titanium Tubing For Industrial Applications
- Marine industry
- Chemical and petrochemical industry
- Pulp and paper industry
- Sporting goods - golf shafts, bicycle frames, etc.
- Medical industry
- Nuclear industry
Especificación
Ti Tube Standards: ASTM B338, B861, B862, DIN 17 861, AMS 4941, AMS 4942
Tube Type: Welded Tube / Seamless Tube
Grade Material: CP Grades 1–4, Alloys: Grade 5, 7, 9, 12, 24, 26, 29
Seamless Tube Dimensions:
- Outer Diameter Range: 0.4–340 mm
- Wall Height Range: 0.4–10 mm
- Length Range: < 18000 mm
Welded Tube Dimensions:
- Outer Diameter Range: 90–5,000 mm
- Wall Height Range: 0.5mm–50mm
- Length Range: < 15000 mm
Estándar
Titanium Seamless Tube Sizes & Standards
|
Dimension
|
Outer Diameter
|
Thickness
|
Length
|
Size Range
|
0.5mm–330mm
|
0.4mm–10mm
|
Max 15m
|
Manufacturing Standards
|
ASTM B338, ASTM B861,DIN 17 861
|
Titanium Welded Tube Sizes & Standards
|
Dimension
|
Outer Diameter
|
Thickness
|
Length
|
Size Range
|
114mm–20000mm
|
0.5mm–50mm
|
Max 15m
|
Manufacturing Standards
|
ASTM B338, ASTM B862
|
Proceso
The production of titanium tubes takes two distinct approaches, one for the production of seamless tubes, the second for welded tubes. The type of tube is determined by the size and the application for use.
Seamless Tube Production
Seamless tube production uses a variety of equipment dependent on the tube requirements and seamless ti tubing is manufactured by either rotary piercing or extrusion.
- Rotary Piercing
Titanium Tube Extrusion Rotary piercing tube production is where billet is pushed through a two roller which are convex-tapered rotating in the same direction. The rollers compress the material and a tapered mandrel is set inside the central void. The mandrel forces the titanium outards and then compresses the material against the back tapered rollers. The tube is then cooled and then cold and hot worked to the desired diameters and specifications.
- Extrusion
Extrusion is a process used to create objects of a fixed, cross-sectional profile. A material is pushed or drawn through a die of the desired cross-section. The two main advantages of this process over other manufacturing processes are its ability to create very complex cross-sections and work materials that are brittle, because the material only encounters compressive and shear stresses. The internal cavity is extruded by placing a pin or mandrel inside of the die.
Welded Tube Production
The welding process is one of the core ways in which we manufacture titanium tubes. Our high quality tubing starts off as a flat strip of metal. The strip is formed into a tube through a series of rollers and the join, also called the seam, is then welded together.
Embalaje
Especificación
Ti Tube Standards: ASTM B338, B861, B862, DIN 17 861, AMS 4941, AMS 4942
Tube Type: Welded Tube / Seamless Tube
Grade Material: CP Grades 1–4, Alloys: Grade 5, 7, 9, 12, 24, 26, 29
Seamless Tube Dimensions:
- Outer Diameter Range: 0.4–340 mm
- Wall Height Range: 0.4–10 mm
- Length Range: < 18000 mm
Welded Tube Dimensions:
- Outer Diameter Range: 90–5,000 mm
- Wall Height Range: 0.5mm–50mm
- Length Range: < 15000 mm
Proceso
The production of titanium tubes takes two distinct approaches, one for the production of seamless tubes, the second for welded tubes. The type of tube is determined by the size and the application for use.
Seamless Tube Production
Seamless tube production uses a variety of equipment dependent on the tube requirements and seamless ti tubing is manufactured by either rotary piercing or extrusion.
- Rotary Piercing
Titanium Tube Extrusion Rotary piercing tube production is where billet is pushed through a two roller which are convex-tapered rotating in the same direction. The rollers compress the material and a tapered mandrel is set inside the central void. The mandrel forces the titanium outards and then compresses the material against the back tapered rollers. The tube is then cooled and then cold and hot worked to the desired diameters and specifications.
- Extrusion
Extrusion is a process used to create objects of a fixed, cross-sectional profile. A material is pushed or drawn through a die of the desired cross-section. The two main advantages of this process over other manufacturing processes are its ability to create very complex cross-sections and work materials that are brittle, because the material only encounters compressive and shear stresses. The internal cavity is extruded by placing a pin or mandrel inside of the die.
Welded Tube Production
The welding process is one of the core ways in which we manufacture titanium tubes. Our high quality tubing starts off as a flat strip of metal. The strip is formed into a tube through a series of rollers and the join, also called the seam, is then welded together.